SPECIFICATIONS iP 900
LAB. GRUPPEN reserve the right to alter functions or specifications without prior notice.
MAX OUTPUT POWER 1)
EIA at 1 kHz and 1% THD FTC 20-20kHz @0.1%THD
8 Ω per channel 200 W 90 W
4 Ω per channel 320 W 300 W
2 Ω per channel 470 W2) 400 2) W
8 Ω bridged 640 W 600 W
4 Ω bridged 900 W2) 800 2) W
Max output voltage
8 ohms load 39 Vrms
Peak voltage, no load 63 V
Distortion etc.
THD 20Hz-20kHz and 1W to full power 0,02 %
THD @ 1kHZ and –1dB under clip 0,005 %
DIM 30 at –3dB under clip 0,008 %
Hum and Noise <-105 dB
Channel separation @10kHz 70 dB
Output impedance 30 mΩ
Slew Rate 30 V/μs
Inputs
Gain, selectable [dB] 20, 23, 26, 29,
32, 35, 38, 41
Impedance 20 kohm
Common mode rejection 50 dB
Rear Panel
Input connectors (2) Neutrik Combo XLR type, 3 pin & 1/4” jack
Input /Link connector (2) 3-pin Phoenix terminal block
Output connectors (2) Neutrik 4-pole Speakon connectors
Net Weight 12.5 kg (27.5 lbs)
Shipping Weight 14.1 kg (31 lbs)
Approvals CE Emission EN 55 103-1, E3
Immunity EN 55 103-2, E3, with S/N below 1% at normal operation level 4)
Safety EN